Patriot Pyro SE Solid State Drive Review

Manufacturer: Patriot Memory LLC
Product Name: Pyro SE Solid State Drive
Model Numbers: PPSE240GS25SSDR
Price As Tested: 60GB Model PPSE60GS25SSDR: $117, 120GB Model PPSE120GS25SSDR: $205, 240GB Model PPSE240GS25SSDR: $470 (Newegg / Amazon)

Full Disclosure: The product sample used in this article has been provided by Patriot.

Benchmark Reviews has previously tested the Patriot Pyro SE, a second-generation SandForce SF-2281 solid state drive, which is considered their standard-IOPS enthusiast storage solution. Now we return to test the Patriot Pyro SE, which pushes the throttle on synchronous NAND flash for the best operational performance possible. Patriot rates the Pyro SE to deliver SATA 6Gb/s read speeds up to 550 MB/s with 4K aligned operations reaching 85,000 IOPS. In this article Benchmark Reviews tests the Patriot Pyro SE SSD, 240GB model PPSE240GS25SSDR, against the leading competitors to find out just how much speed and performance this new solid state drive really offers.

SandForce's second-generation SF-2281 SSD processor maintains all of the original core technology introduced in the SF-1200 series, but now improves performance with 20% faster IOPS and 40% faster sequential read/write throughput. They've enhanced BCH ECC capability, and the new processors now support ATA-7 Security Erase. Finally, the new SF-2200 series implements cost-effective 20nm-class NAND flash from all leading flash vendors with Asynch/ONFi1/ONFi2/Toggle interfaces.

For many within the industry, SandForce was considered to control the 2010 market in much the same way that Indilinx did in 2009. The difference now is that SandForce's platform offers several technical benefits that the old Indilinx Barefoot platform was not capable of. Nearly into 2012, the SSD landscape is approximately the same, but with some interesting new twists. Benchmark Reviews confirms that 2nd-generation SandForce processors are keeping up with their past reputation, using performance tests on the Intel SATA 6Gb/s controller.

Solid State vs Hard Disk

Despite decades of design improvements, the hard disk drive (HDD) is still the slowest component of any personal computer system. Consider that modern desktop processors have a 1 ns response time (nanosecond = one billionth of one second), while system memory responds between 30-90 ns. Traditional hard drive technology utilizes magnetic spinning media, and even the fastest spinning mechanical storage products still exhibit a 9,000,000 ns / 9 ms initial response time (millisecond = one thousandth of one second). In more relevant terms, the processor receives the command and must then wait for system memory to fetch related data from the storage drive. This is why any computer system is only as fast as the slowest component in the data chain; usually the hard drive.

In a perfect world all of the components operate at the same speed. Until that day comes, the real-world goal for achieving optimal performance is for system memory to operate as quickly as the central processor and then for the storage drive to operate as fast as memory. With present-day technology this is an impossible task, so enthusiasts try to close the speed gaps between components as much as possible. Although system memory is up to 90x (9000%) slower than most processors, consider then that the hard drive is an added 1000x (100,000%) slower than that same memory. Essentially, these three components are as different in speed as walking is to driving and flying.

Solid State Drive technology bridges the largest gap in these response times. The difference a SSD makes to operational response times and program speeds is dramatic, and takes the storage drive from a slow 'walking' speed to a much faster 'driving' speed. Solid State Drive technology improves initial response times by more than 450x (45,000%) for applications and Operating System software, when compared to their mechanical HDD counterparts. The biggest mistake PC hardware enthusiasts make with regard to SSD technology is grading them based on bandwidth speed. File transfer speeds are important, but only so long as the operational IOPS performance can sustain that bandwidth under load.

Bandwidth Speed vs Operational Performance

As we've explained in our SSD Benchmark Tests: SATA IDE vs AHCI Mode guide, Solid State Drive performance revolves around two dynamics: bandwidth speed (MB/s) and operational performance (IOPS). These two metrics work together, but one is more important than the other. Consider this analogy: bandwidth determines how much cargo a ship can transport in one voyage, and operational IOPS performance is how fast the ship moves. By understanding this and applying it to SSD storage, there is a clear importance set on each variable depending on the task at hand.

For casual users, especially those with laptop or desktop computers that have been upgraded to use an SSD, the naturally quick response time is enough to automatically improve the user experience. Bandwidth speed is important, but only to the extent that operational performance meets the minimum needs of the system. If an SSD has a very high bandwidth speed but a low operational performance, it will take longer to load applications and boot the computer into Windows than if the SSD offered a higher IOPS performance.

Previous Page - Next Page >>