Phanteks Enthoo Luxe Full-Tower Case Review


<< PREVIOUS            NEXT >>

Phanteks Enthoo Luxe Full-Tower Case Review

By Julian Duque

Manufacturer: Phanteks Co.
Product Name: Phanteks Enthoo Luxe Full Tower Chassis
Model Number: PH-ES614L_BK
UPC: 886523300236
Price As Tested: $149.99 ( Amazon l Newegg )

Full Disclosure: The product sample used in this article has been provided by Phanteks.

A few months ago Phanteks released the Enthoo Pro, a case that Benchmark Reviews concluded as being a game changer in the case market. Prior to the Enthoo Pro, Phanteks had already released a case that was praised by many enthusiasts as the most water cooler friendly case released in 2013, the Enthoo Primo.. With the release of the Enthoo Pro, Phanteks had a price gap to fill in it’s Enthoo line-up, leading to the release of the Enthoo Luxe, the case which I will be reviewing today.

Like many European companies, Phanteks is more concerned with the build quality of it’s products than with anything else. Starting from their fans all the way to their cases, I can almost guarantee that any of their products will last you a long time, but if my advice is not enough to convince you then the 5 year warranty they include in all of their products probably will.


Surprisingly the Enthoo Luxe is Phantek’s third case. What is no surprise is that it is packed with features as seen below. If are looking for a more detailed set of specifications for water-cooling we recommend that you jump ahead to the dedicated water-cooling section of this review.


As found on Phanteks.com

– Dual removable hard drive cages
– 2x removable Drop-N-Lock SSD brackets
– Fully equipped with dust filters (1x top, 1x front, 2x bottom)
– Removable top mesh panel for easy fan installation and dust filter cleaning
– Compartment for fan installation in top panel
– Clean cable management using Phanteks’ pre-installed Hoop-N-Loop cable ties
– Removable PSU cover
– Mod friendly structure uses screws NOT rivets
– 10 color ambient lighting controller
– 2x USB 3.0, 2x USB 2.0, microphone, 3.5mm audio jack


Courtesy Phanteks.com

235 mm x 560 mm x 550 mm (W x H x D)
Form Factor
Full Tower Chassis
Aluminum faceplates, Steel Chassis
Motherboard Support
Front I/O
2x USB 3.0, 2x USB 2.0, Mic, Headphone
Side Window
Yes, split-window design
PSU Cover
Expansion & Drive Bays
Expansion slots
External 5.25″
Internal 3.5″
6 (2x 3 HDD cages)
Internal 2.5″
7 (2x 3 HDD cages + 2x SSD brackets )
120mm fan
140mm fan
200mm fan
2x 1x (included)
3x (1x included) 1x
1x (included)
In front of HDD Cages
Graphic card
347 mm
338 mm minus reservoir diameter (with reservoir bracket installed)
472 mm (without HDD Cages)
CPU cooler
193 mm
Cable management
27 mm (39 mm at PSU area)
Power Supply
215.9 mm (with bottom fan or radiator installed)
Packaging Information
Package Dimension
325mm x 635mm x 632mm (WxHxD)
Net Weight
13.9 Kg
Gross Weight
16 Kg
5 Years Limited


<< PREVIOUS            NEXT >>


Skip to comment form

  1. Sir D


    – Shares the same chassis as the Enthoo Pro
    – Power Supply cover does not have rubber grommets for tubing”

    1: I´d like to see any other cases out there, at that price range that even have a PSU cover… (other than the NZXT H440 which doesn´t have nearly as many radiator mounting options)
    2: The interior build of the Pro proved itself to be extremely efficient and catered for a lot of enthusiast water coolers needs…. so why NOT use the same layout???

    Corsair has the same interior layout in the 750D, 760T and the 730T… haven´t heard any complaints there…

    NO “Cons” mentioned were of any value if one takes the price and the total build quality into consideration. There are other cases out thee that cost way more that are not even close to the Phanteks Enthoo Luxe. 😉


  2. SqugSCX

    Can I fit a 60mm Rad at the front of the Enthoo Luxe? I was a bit confused with your water cooling specs.

    If not a 60mm what thickness of rad can I fit?

    1. Julian Duque

      You can install as thick as you want of a radiator as long as you don’t install a 240mm radiator or a pump at the bottom near the drive cages. If you install a 280 mm radiator you might need to look into the spacing between holes as they are not elongated although the one from the luxe is standard.

  3. Addison

    But can I install a massive 240 radiator with push-pull fans at the bottom of the case and still use one of the hard drive cages?

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>