Tag Archive: Scythe

Scythe SCBYK-1000 BYAKKO Cooler Review

Scythe SCBYK-1000 BYAKKO Cooler Review Another air cooler has landed on the editorial board. Scythe has sent us a copy of their Byakko cooler. We have previously tested coolers from Scythe, and they have all been of good quality, so we expect when that Byakko following this trend. Who and what is Byakko so? Scythe …

Continue reading »

Scythe Kabuto 3 CPU Cooler Review

Scythe Kabuto 3 CPU Cooler Review Another Scythe CPU cooler on the bench and this time it’s the Scythe Kabuto 3. We are not going to test this one on our usual X99 test bench, it’s not compatible, instead we will be testing it on an Intel 6700K CPU. The Scythe Kabuto 3 is another …

Continue reading »

Scythe Byakko CPU Cooler Announced

Scythe Byakko CPU Cooler Announced

Scythe Byakko CPU Cooler Announced Japanese cooling expert Scythe announces a new addition to the tower-design CPU cooler line-up. Scythe Byakko is a compact cooling solution with a total height of mere 130 millimeters, which fits in virtually every PC case. Great compatibility is assured thanks to the asymmetric alignment of the base-plate and the …

Continue reading »

Scythe Fuma CPU Cooler Review

Scythe Fuma CPU Cooler Review We have the Scythe Fuma for review today, a CPU cooler Scythe claim to be a smaller CPU cooler without “sacrificing performance”. The Fuma can be traced back to the Scythe Mine 2 CPU Cooler, with development in two main areas, base plate design and fin structures. We know the …

Continue reading »

Scythe Ninja 4 CPU Cooler Review

Scythe Ninja 4 CPU Cooler Review Scythe, most people will know them. In case you don’t, Scythe have been around for years and they have a notable reputation in cooling, that means sites like Hardwareslave, will always take note of their products. We have a couple of coolers coming in the next couple of weeks …

Continue reading »

Scythe Fuma CPU Cooler Review

Scythe Fuma CPU Cooler Review Heatsink designs are driven by the fundamental principle that a larger surface area equates to better heat dissipation than a smaller area. Factoring in componential consent, modern aftermarket CPU tower heatsinks had to get creative to compensate and dial-in the efficiency needed, hence the rise of dual-tower cooler designs… at Modders-Inc …

Continue reading »

Scythe Grand Kama Cross 3 CPU Cooler Review

Scythe Grand Kama Cross 3 CPU Cooler Review We welcome back Scythe to the Hardwareslave office with the Grand Kama Cross 3, a cooler with a bit of a difference to it. We haven’t tested a Scythe product since the Scythe Mugen MAX CPU cooler review last year and we gave that a good score, …

Continue reading »

Scythe Kabuto 3 TOP-Flow-CPU-Cooler Introduced

Scythe Kabuto 3 TOP-Flow-CPU-Cooler Introduced

Scythe Kabuto 3 TOP-Flow-CPU-Cooler Introduced Japanese cooling expert Scythe announces today the third version of the famous TOP-Flow-CPU-Cooler Scythe Kabuto. Scythe engineers have revamped the heatsink design as well as the heatsink structure of the Kabuto 3 and incorporated a hybrid heatpipe system. This hybrid system consists of two 6 mm and three 8 mm high-quality …

Continue reading »

Scythe Fuma Twin-Tower CPU Cooler Review

Scythe Fuma Twin-Tower CPU Cooler Review When the very first dual tower (or sandwich type as many like to call them) CPU coolers made their debut roughly 8 years ago everyone in the industry understood that this pretty much ment that manufacturers had reached a point where they could no longer squeeze much better cooling …

Continue reading »

Scythe Shuriken Rev.B Low-Profile CPU Cooler Review

Scythe Shuriken Rev.B Low-Profile CPU Cooler Review The Scythe Shuriken Revision B has been around for roughly 6-7 years and is yet another top-down (C-type), low-profile and quite compact CPU cooler just like the AXP-100/200 line by Thermalright so right from the beginning it’s clear that this is not a powerful solution and certainly not …

Continue reading »

Scythe Thermal Elixer 2 Thermal Grease Launched

Scythe Thermal Elixer 2 Thermal Grease Launched

Scythe Thermal Elixer 2 Thermal Grease Launched Japanese cooling expert Scythe presents the second version of its Thermal Elixer high performance thermal grease. After collecting the user’s feedback and experience with the first Thermal Elixer, Scythe engineers created an improved thermal grease solution. Thermal Elixer 2 utilizes the Pure Aluminum Particle Hybrid Technology and is …

Continue reading »

Scythe GlideStream 120 PWM SC Fan Introduced

Scythe GlideStream 120 PWM SC Fan Introduced

Scythe GlideStream 120 PWM SC Fan Introduced Japanese cooling expert Scythe extends the GlideStream series by announcing a brand new model with PWM-support and built-in fan controller. Scythe’s GlideStream 120 fan series is based on further development of the very popular Scythe Slip Stream fan series. The new GlideStream 120 PWM SC fan combines the …

Continue reading »

Scythe Ninja 4 SCNH-4000 Heatsink Review

Scythe Ninja 4 SCNH-4000 Heatsink Review While Scythe doesn’t overtly market its heatsinks as “silent”, the company has typically produced CPU coolers which do meet the quiet esthetic. In this review Frostytech will be testing out the new Scythe Ninja 4 heatsink – a 156mm tall boxy looking thermal solution which is designed for lower …

Continue reading »

Scythe Ninja 4 CPU Cooler Review

Scythe Ninja 4 CPU Cooler Review Scythe has really made a name for themselves in the DIY PC cooling market since being founded back in 2002. Over the years they have had some really great CPU coolers, many which we have reviewed. The Ninja series has primarily been reserved for the top of the line …

Continue reading »

Scythe Fuma CPU Cooler Review

Scythe Fuma CPU Cooler Review There is another CPU cooler review on our agenda. Today’s candidate is the Scythe Fuma. At review date the double tower cooler has not been officially released, but we have already received one for testing. The Scythe Fuma will be released very soon in Europe… at OCInside Related Items: Scythe …

Continue reading »

Scythe Ninja 4 CPU Cooler Review

Scythe Ninja 4 CPU Cooler Review If at first you don’t succeed, try, try, try again. Nobody gets things right the first time and even if done well, needs change over time so a revision is almost always guaranteed to happen. It is not about striving for perfection because what that is cannot be a …

Continue reading »

Scythe Fuma Twin-Tower CPU Cooler Released

Scythe Fuma Twin-Tower CPU Cooler Released

Scythe Fuma Twin-Tower CPU Cooler Released Japanese cooling expert Scythe announces the availability of it’s new Fuma Twin-Tower CPU-Cooler. The new model combines a compact Twin-Tower design with total height of mere 149 millimeters and impressive cooling performance. The compact tower-design allows the Scythe Fuma to easily fit into most on-market PC chassis, making it …

Continue reading »

Scythe Iori CPU Cooler Review

Scythe Iori CPU Cooler Review Today we are testing the Scythe Iori CPU cooler with top-blow design on OCinside.de. Because of their flat design, top-blow coolers are suitable for small environments such as a HTPC. Iori is the Japanese word for a small mountain hut as place of refuge. We will find out, if a …

Continue reading »

Scythe Ninja 4 CPU Cooler Review

Scythe Ninja 4 CPU Cooler Review Scythe is looking for a stealth kill on the competition with their new Ninja 4 CPU cooler. Featuring a massive Tower, it can run semi-passive or with dual fans. Versatile and deadly, it looks to beat the heat and the competition… at techPowerUp! Related Items: Scythe Mugen 4 CPU Cooler …

Continue reading »

Scythe Grand Kama Cross Version 3 CPU Cooler Released

Scythe Grand Kama Cross Version 3 CPU Cooler Released

Scythe Grand Kama Cross Version 3 CPU Cooler Released Japanese cooling expert Scythe announcing the third version of it’s “Grand Kama Cross” Top-Flow CPU cooler. New Scythe Grand Kama Cross 3 is based on the same extraordinary X-Structure concept as the predecessor, allowing especially efficient cooling of both the CPU and the surrounding components such as VGA …

Continue reading »

Scythe Ashura CPU Cooler Review

Scythe Ashura CPU Cooler Review The Ashura is aesthetically pleasing and Scythe gives you a two-year warranty, great performance, and great build quality. The Ashura comes with a single GlideStream 140mm PWM fan that can handle the heat of normal use and overclocking. The offset of the fin stack makes getting to your RAM a …

Continue reading »

Scythe Mugen Max CPU Cooler Review

The Scythe Mugen Max is compatible with most modern desktop motherboards coming from both AMD and Intel with the exception of the AM1 platform, which you will most likely not need this cooler for. Included with the Mugen Max is a 140 mm Scythe GlideStream fan that has been adapted to have 120 mm hole spacing. Unfortunately it only comes with one and a second one of that same model can not be easily purchased inside the US, but we have managed to get one for our noise tests.

Continue reading »

Scythe Slip Stream 120 DB Fans Released

Scythe Slip Stream 120 DB Fans Released

Scythe Slip Stream 120 DB Fans Released With Dual Ball Bearing and Long Life Span Japanese cooling expert Scythe expands the 120 mm case fan portfolio with the announcement of the new Slip Stream 120 DB axial-fans. The new line up includes five regular models with fixed fan speed as well as one PWM-enabled model. …

Continue reading »

Scythe Ninja 4 CPU Cooler Announced

Scythe Ninja 4 CPU Cooler Announced

Scythe Ninja 4 CPU Cooler Announced Japanese cooling expert Scythe announces the official successor of Ninja 3 Rev. B CPU Cooler. Ninja 4 comes with some major technical innovations, including the increased performance and reduction of overall weight by 180 grams. Wide range compatibility to the common sockets from AMD™ and Intel™ is assured, which …

Continue reading »

Scythe Mugen Max SCMGD-1000 Heatsink Review

Scythe Mugen Max SCMGD-1000 Heatsink Review Scythe’s Mugen Max heatsink weighs 870grams and stands 166mm tall. The heatsink is constructed around six 6mm diameter copper heatpipes which are soldered to a 2mm thick nickel plated copper base plate. The heatpipes are swaged into a 113x145x84mm aluminum fin stack which is roughly broken up into four …

Continue reading »

Older posts «

Fetch more items