«

»

Scythe Ashura CPU Cooler Review

PAGE INDEX

<< PREVIOUS            NEXT >>

Installing the Scythe Ashura

Before we inspect each member of our new CPU cooler collection, let’s establish that our tests consist of methods we have determined to be the best for our one singular purpose. Our methodology isn’t written in stone, and could very likely be changed or modified as we receive justification (and feedback from the community). Our scope is limited to stand-alone products only, meaning those products which can be installed and operated without additional critical components needed or kit construction. This is the reason for this first test, in which the mounting system for each cooler is tested. Since this is not an apple to apples comparison, but rather a subjective description of each of the kits available without any form of quantitative data, it does not affect the numerical scores we give for each product. The purpose of this test is to inform our readers on how the mounting system of each processor cooler can affect the buying experience.

As usual, we will mount the cooler in one of our Intel test platforms. This time, we will be using an XFX MB-N780-ISH9 LGA 775 motherboard to test the mounting system included with the Scythe Ashura, which Scythe lists as one of the supported sockets.

Scythe-Ashura-Back-Plate

Installing the Scythe Ashura starts with locating the four silver nuts, the back-plate, and the LGA 775 spacer to prevent the back-plate to make contact with the contacts located behind the motherboard’s socket. Scythe does not clearly package each component in an individual bag which can confusion. For AMD sockets you will have to remove the top fan bracket, however you will still need the back-plate included with all AMD motherboards.

Scytrhe-Ashura-Mounting-Bracket

With the back-plate and thumb nuts in place it is just a matter of seconds to get the two mounting brackets installed. Once the back-plate is held snug it is time to decide which way to install the Scythe Ashura in order to install the two brackets. The scythe manual instructs users to install it vertically, which is a smart choice as you will have less compatibility issues this way due to the heatsinks shape.

Scythe-Ashura-Mounting

So far the Scythe Ashura has been an easy installation, but it is still a bulky heatsink. However, because it is a slim cooler the screws that are located right underneath the heatsink are easily accessible and visible from the top making the installation of this cooler far easier than any other performance heatsink in our 2015 list. Scythe even includes an angled wrench which was really unnecessary as the screws were accessible in any motherboard that the Ashura is mounted on.


SKIP TO PAGE:

<< PREVIOUS            NEXT >>

2 comments

  1. RealNeil

    I have the Scythe Mugen Max and it’s one of the best that I’ve ever used

    1. Ryuhoshi

      I have it too! It’s really amazing, It cost me around ~40$, it’s awesome!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*