«

»

QNAP TS-470 NAS Server Review

PAGE INDEX

<< PREVIOUS            NEXT >>

QNAP TS-470 NAS Hardware Specifications

The TS-470 is designed for high-end SMB, and has some impressive hardware specs:

CPU Intel® 2.6GHz Dual-core Processor
DRAM 2GB SO-DIMM RAM
Flash Memory 512MB DOM
Hard Disk Drive 4 x 3.5” or 2.5” SATA 6Gb/s, SATA 3Gb/s hard drive or SSD
Hard Disk Tray 4 x Hot-swappable tray with key lock
LAN Port 4 x Gigabit RJ-45 Ethernet port (2 ports are provided by the included PCI-E NIC);
Optional dual-port 10 GbE NIC support by replacing the dual-port GbE PCI-E NIC
LED Indicators Status, USB, LAN, HDD 1 – 4
USB 2 x USB 3.0 port (rear)
3 x USB 2.0 port (front: 1, rear:2)
Support USB printer, pen drive, USB hub (front), and USB UPS etc.
eSATA 2 x eSATA port (rear)
HDMI HDMI x 1
IR Built-in Infrared Receiver (IR) for MCE remote control
Audio Out 1 (Supported application: Music Station, HD Station)
Audio In 1 (reserved)
Buttons Power, Reset, USB One Touch Backup
Alarm Buzzer System warning
LCD Panel Mono-LCD display with backlight, Enter and Select buttons for configuration
Secure Design K-lock security slot for theft prevention
Fan 1 x quiet cooling fan (9 cm, 12V DC)
PCI-E Slot 1, with dual-port GbE NIC pre-installed (for optional 10GbE network expansion)
Form Factor Tower
Dimensions 177 (H) x 180 (W) x 235 (D) mm
6.97 (H) x7.09 (W) x 9.25 (D) inch
Weight Net weight:4.56 kg (10.05 lbs)
Gross weight: 5.7 kg (12.57 lbs)
Power Consumption (W) Sleep mode: 23.9W
In Operation: 38.4W
Power-off (in WOL mode): 1W
(with 4 x 500GB HDD installed)
Temperature 0-35˚C
Humidity 5~95% RH non-condensing, wet bulb: 27˚C
Power Supply Input: 100-240V AC, 50/60Hz, Output: 250W

Now let’s look at the Software Specifications. They’re quite a bit longer, as QNAP has incorporated an amazing number of functions in their Turbo NAS products.


SKIP TO PAGE:

<< PREVIOUS            NEXT >>

3 comments

  1. dansus

    Be nice to see an approved pci-e tv tuner like Black Gold tuners for a complete HTPC solution.

    1. Bruce Normann

      For now, TV support is limited to USB tuners. There are about eight models listed in the compatibility table.

      “You may install TV Station from QPKG Center in firmware 3.8.1 or above. A compatible DVB-T USB TV Tuner as listed is required to use this function.”

      Asus My Cinema U3100 Mini
      AverMedia A850(AVerTV Volar Black HD)
      FOTOCOM HiHD3
      Hauppauge WinTV NOVA-T Stick
      KWorld KW-DVB-T 399U
      PCTV Systems nanoStick Solo 73e SE
      QNAP USB-DVBT01
      UPMOST DVB192A HD

      1. dansus

        None of those seem to support T2, making them redundant. Plus USB tuners generally suck.

Leave a Reply

Your email address will not be published. Required fields are marked *

CAPTCHA Image

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>